2016 used pickup trucks for sale in Michigan

What a 2016 pickup costs in Michigan

The 2016 model-year used pickup market in Michigan currently shows an average asking price of $10,417 across 2 listings, with average odometer readings around 142,045 mi. Compared with the national 2016 average of $12,345, prices in Michigan are running roughly 15.6% lower. A discount of this size relative to the national average usually means either a softer regional economy or a glut of trade-ins, both of which favor patient buyers.

Michigan sits in the Midwest region, and that geography matters when shopping a specific model year. Michigan is the spiritual home of the American pickup, and used inventory reflects it. Detroit-area lots get a constant stream of factory employee leases and well-kept private trades. Watch for salt-belt rust, especially on trucks from rural counties that see heavy winter brine. For a 2016 truck specifically, expect roughly 108,000 mi of expected lifetime mileage as the rough national baseline — anything significantly under that is either a low-use creampuff or a reset, and anything significantly over is a working truck that should be priced accordingly. Use the average odometer figure above as your local yardstick.

The 2016 model year falls into a specific equipment generation for most major nameplates. For Ford, 2016 F-150s sit in the aluminum-body 13th-generation run that introduced lightweighting and the second-generation 3.5L EcoBoost. Ram 1500s of the same vintage straddle the DS-generation classic body and the new DT generation depending on trim. Chevrolet and GMC half-tons are the K2XX or T1XX platform depending on year cutoff. Toyota Tundras are still on the second-generation aluminum-bed platform unless you are looking at a pre-redesign truck. Knowing which generation you are buying matters more than the model year itself — shop the model index for generation-by-generation buying notes.

Specific to Michigan: salt-belt corrosion is the number one issue to inspect for. For a 2016 truck — now 9 model years old — that inspection matters more than it would on a one- or two-year-old truck still under factory powertrain warranty. Frame, suspension bushings, brake lines, and any aluminum-to-steel galvanic-corrosion contact points should be inspected on a lift. Pay particular attention to coolant condition (a sign of how the previous owner maintained the truck), transmission fluid (especially on 8- and 10-speed automatics), and the condition of the rear-axle pinion seal. A pre-purchase inspection from an independent shop typically runs $120-$180 in most Midwest markets and will surface 80% of the issues that turn into expensive surprises later.

Cross-shopping adjacent model years is one of the highest-leverage moves a used-truck buyer can make. The 2015 market in Michigan is typically 8% cheaper for what is often a mechanically identical truck. The 2017 market trades higher prices for lower mileage and more remaining factory warranty. If you are not locked into a specific model-year for tax or insurance reasons, run the math both ways before committing. Most buyers find that one model year on either side of their target is where the best total-cost-of-ownership math actually lives.

Once you have narrowed to two or three trucks worth driving across the state to inspect, treat the test-drive as the most important hour of the purchase. Cold-start the truck yourself before the dealer does. Listen for lifter tick on overhead-cam V8s. Drive at least 30 minutes including highway, low-speed turns from a stop, and at least one panic stop on dry pavement. A 2016 pickup with 142,045 mi on the clock has plenty of life left in it if it has been maintained — and almost no life left in it if it has not.